Honeywell RTH4300B Programmable Thermostat
TURN OFF POWER at the heating/cooling system or the fuse/circuit breaker panel before you begin.
MERCURY NOTICE: Do not place your old thermostat in the trash if it contains mercury in a sealed tube. Contact your local waste management authority for instructions regarding recycling and proper disposal.
Need Help?
For assistance with this product please visit http://yourhome.honeywell.com or call Honeywell Customer Care toll-free at 1-800-468-1502
Read and save these instructions.
® U.S. Registered Trademark. Patents pending.
Copyright © 2006 Honeywell International Inc. All rights reserved.
Installation
Installation is easy -even if you’ve never done it before!
Your new thermostat has been designed for fast, easy installation. Just follow the simple, step-by-step instructions in the following pages.
Install in three simple steps
- Label wires and remove your old thermostat (see pages 5-8).
- Install and wire your new thermostat (see pages 9-16).
- Set your new thermostat to match your heating/cooling system (see pages 17-20).
Installation tips
- Have everything you need ready to go before you begin (see pages 3-4).
- Do not use wire color as a guide. Use wire labels instead (see page 8).
The post Honeywell RTH4300B Programmable Thermostat User Guide appeared first on thermostat.guide.
source https://thermostat.guide/honeywell/honeywell-rth4300b-programmable-thermostat-user-guide/
No comments:
Post a Comment