SALUS RT310ISR Internet Wireless thermostat
Introduction
The RT310iSR module will switch your heating system on or off, as needed, in accordance with the temperature set by you, locally on the device or remotely using the dedicated app. The completed RT310iSR series consists of a transmitter – RT310iTX thermostat, an iTG310 gateway, and a Smart Relay SR868.
Product Compliance
This product complies with EMC 2014/30/EU, LVD 2014/35/EU, RED 2014/53/EU, and RoHS 2011/65/EU. Full text of the EU
Declaration of Conformity on www.saluslegal.com
868.0-868.6MHz; <13dBm
Safety Information
Use in accordance with the regulations. Indoor use only. Keep your equipment completely dry. Disconnect your equipment before cleaning it with a dry towel.
- Turn on the LCD backlight
- Turn On/Off the Frost Mode
- Increase button
- Decrease button
- Test Mode/ Pairing Mode
LCD icons
| 1. Vacation Mode 2. RF signal 3. Low battery 4. Heating Mode ON 5. Frost Protection 6. Economy Mode ON |
7. Internet Connection 8. Cooling Mode ON 9. Schedule Mode ON 10. Temporary / Permanent Override 11. Temperature unit 12. Current Temperature |
LED indication Smart Relay
| LED State | Description | |
| Red | On | The relay is off. |
| Flash | The relay is in pairing mode. | |
| Green | On | The relay is on. |
| 2 x Flash | The relay is writing pairing code. | |
| Red and Green | Flash alternately | The relay is paired but lost the link. |
| Flash in the different sequence | It indicates the software version after reboot. | |
Installation
Installation – Step 1
Installation – Step 2
Before inserting the batteries, please make a note of your SRT number and register your device on the app.
Installation – Step 3
Connect the gateway to your router. Gateway is online when the green LED is on.
 |
 |
 |
| Gateway receiving command | Internet signal interrupted | No Internet connection |
Once the 
icon appears on the LCD, the thermostat is online and you can add it to the App.
Pairing process
The thermostat and the smart relay are pre-paired from the factory if purchased as a pack.
If not, follow the thermostat pairing process.
In case you want to add more than one relay, set all relays into pairing mode, including the ones already paired, and start the pairing process. The LED will flash red when the relay is in pairing mode. Put the thermostat into pairing mode, by pressing the pair button for 3 seconds. After the smart relay is paired with the thermostat, the LED is steady red.
Test the pairing process
If the thermostat loses connection with the Smart Relay, the Smart Relay goes into fail-safe mode after 30 minutes.
Registration
Download the RT310i App, create an account, and register your device. Follow the on-screen instructions to complete all the steps.
Device Settings Via the App
Customize your settings according to your preferences. Time and date will be set automatically once connected to the internet. Set the mode (heat/cool). Heat Mode is used for controlling a heating boiler. Cool Mode is used for controlling a cooling device. In Cool Mode, you can choose temperature accuracy between ±0.5°C and ±0.25°C. In Heat Mode, you can select as well between a lower comfort level (6 on/off cycles per hour) and a higher comfort level (9 on/off cycles per hour). Also, in order to calibrate the temperature, you can offset it using a ± 3°C range.
General Operation
There are 3 program settings:
- Schedule (7 days, 5-2 days, and 24 hours) 2. Manual and 3. Off.
| ALL | 5/2 | INDIVIDUAL |
| Set one schedule for the entire week (each day the same) | Set a schedule for the working days and for the weekend | Set a daily schedule (each day different) |
In Manual Mode, you will permanently override the schedule. Exit Manual Mode by switching to Schedule or turning off the thermostat.
If the internet connection is lost the thermostat will follow the schedule. If it was in Frost Mode you can disable the Frost function from the device and continue following the schedule.
Holiday Mode
Select the period for this function. Frost Mode temperature will be activated during this period.
After the Holiday Mode ends, the thermostat will follow the previous setting (Schedule, Manual or Off).
| DE / NL: support@salus-controls.de tel: +49 6108 8258515 FR: technicalsupport@saluscontrols.fr tel: +33 (0) 134 724 039 UK: tech@salus-tech.com tel: +44 (0) 1226 323961 |
Head Office: SALUS Controls Plc Units 8-10 Northfield Business Park Forge Way, Parkgate, Rotherham S60 1SD, United Kingdom T: +44 (0) 1226 323961 E: sales@salus-tech.com |
SALUS Controls is a member of the Computime Group
Maintaining a policy of continuous product development SALUS Controls plc reserves the right to change specifications,
design, and materials of products listed in this brochure without prior notice.
For a PDF Installation guide please go to www.salus-manuals.com
Issue date: 2020 V
Version: V002
REFERENCE:
Download Manual:
SALUS RT310ISR Internet wireless thermostat Quick Guide
SALUS RT310ISR Internet wireless thermostat Quick Guide
The post SALUS RT310ISR Internet Wireless Thermostat Quick Guide appeared first on thermostat.guide.
source https://thermostat.guide/salus/salus-rt310isr-internet-wireless-thermostat-quick-guide/
No comments:
Post a Comment